Smooth non-woven wallpaper
Recommended use
Placement
Printable non-woven wallpaper with a smooth surface is suitable for inkjet latex or UV printers. Thanks to its matte surface, the wallpaper is suitable for the production of impressive wall decorations. The wallpaper can be applied to the walls without additional surface protection. It is applied using a standard wallpaper paste suitable for nonwovens. It is suitable for flat or only slightly structured surfaces. It has a non-flammability certificate C-s1, d0 (certification according to the European standard EN 13501-1).
Printing
UV, latexWarnings and recommendations
The manufacturer's recommendations for storage and handling of the material must be observed. To maintain the properties of the material, it is necessary to store at a relative humidity of 30–65%, at a temperature of 10–30 ° C. The same conditions apply to printing. Because the wallpaper has a higher basis weight (it is a relatively thick material), it is usually glued to the so-called contact, not over each other. Applying wallpaper to a wall requires the work of an experienced wallpaper or signmaker.Technical Data Sheet
Characteristics
- Suitable for inkjet, latex or UV printers
- Matte and homogeneous surface
- It is highly opaque and reliably covers the substrate to which it is applied.
- FSC® certification
- PVC free
- Dimensionally stable is both dry and wet, exceptionally resistant to UV radiation.
- The material cannot be laminated.
- Detachable in dry conditions
Material thickness
Smooth non-woven wallpaper
Recommended use
Placement
Printable non-woven wallpaper with a smooth surface is suitable for inkjet latex or UV printers. Thanks to its matte surface, the wallpaper is suitable for the production of impressive wall decorations. The wallpaper can be applied to the walls without additional surface protection. It is applied using a standard wallpaper paste suitable for nonwovens. It is suitable for flat or only slightly structured surfaces. It has a non-flammability certificate C-s1, d0 (certification according to the European standard EN 13501-1).
Printing
UV, latexWarnings and recommendations
The manufacturer's recommendations for storage and handling of the material must be observed. To maintain the properties of the material, it is necessary to store at a relative humidity of 30–65%, at a temperature of 10–30 ° C. The same conditions apply to printing. Because the wallpaper has a higher basis weight (it is a relatively thick material), it is usually glued to the so-called contact, not over each other. Applying wallpaper to a wall requires the work of an experienced wallpaper or signmaker.Technical Data Sheet
Ask us
Use the contact form, call us or email us.Our team is ready to help you with every wish, requirement or demand. We are not keeping our years of experience and know-how to ourselves!