Carpet sticker

Recommended use

Use at exhibitions and fairs
Furniture stores
General use at points of sale (POS)
Any short-term carpet decoration

Placement

Interior Interior
Exterior Exterior

Self-adhesive foil is intended for application on carpets with short pile. It is suitable for short-term carpet decoration and communication of advertising campaigns and graphics. The foil is suitable for application in larger areas, because it adheres so well to the surface of the carpet. For shape cuts, it is advisable to avoid complex shapes. The corners of the cut should be rounded. If the corners of the crop are sharp, premature peeling may occur. It is advisable to follow the recommended procedure during application. The temperature of the surface to which the film will be applied should be in the range of 10 ° C to 15 ° C. The surface of the carpet must be dry, clean, degreased and free of dust. The temperature after application should remain consistent for the next 72 hours.

Printing

Solvent, Eco-solvent, UV, latex

Warnings and recommendations

We recommend laminating the self-adhesive film with floor lamination with ASLAN MP300 anti-slip treatment, not only to increase safety, but also to protect against abrasion. Furthermore, it is advisable to avoid complex shapes and sharp corners of the cut. This prevents premature peeling of the self-adhesive film.


Technical list
Characteristics
  • Special self-adhesive foil developed for temporary decoration of carpets with short pile.
  • The self-adhesive foil holds very well on the carpet and at the same time is very easy to remove in the case of short-term applications, without adhesive residues.
    • It is ideal to apply on a larger area so that the foil adheres well to the carpet. It is possible to choose a special shape cutting of the foil, however, it is good to simplify the cutting as much as possible. Complex shapes or sharp corners could cause premature peeling of the film.
    • Self-adhesive film should be used in conjunction with ASLAN MP300 floor lamination, which has a non-slip finish (safety class R13).
    • ASLAN DFP49 with ASLAN MP300 lamination is fire safety certified according to DIN EN-13501-1.
Material thickness
150 mic 150 mic

Carpet sticker

Recommended use

Use at exhibitions and fairs
Furniture stores
General use at points of sale (POS)
Any short-term carpet decoration

Placement

Interior Interior
Exterior Exterior

Self-adhesive foil is intended for application on carpets with short pile. It is suitable for short-term carpet decoration and communication of advertising campaigns and graphics. The foil is suitable for application in larger areas, because it adheres so well to the surface of the carpet. For shape cuts, it is advisable to avoid complex shapes. The corners of the cut should be rounded. If the corners of the crop are sharp, premature peeling may occur. It is advisable to follow the recommended procedure during application. The temperature of the surface to which the film will be applied should be in the range of 10 ° C to 15 ° C. The surface of the carpet must be dry, clean, degreased and free of dust. The temperature after application should remain consistent for the next 72 hours.

Printing

Solvent, Eco-solvent, UV, latex

Warnings and recommendations

We recommend laminating the self-adhesive film with floor lamination with ASLAN MP300 anti-slip treatment, not only to increase safety, but also to protect against abrasion. Furthermore, it is advisable to avoid complex shapes and sharp corners of the cut. This prevents premature peeling of the self-adhesive film.


Technical list

Ask us

Use the contact form, call us or email us.

Our team is ready to help you with every wish, requirement or demand. We are not keeping our years of experience and know-how to ourselves!

Phone number
420 414 113 722
Email
obchod@sittardia.cz